Safety Messages - Avaya Advanced 2330 Vorschriften

signal integrity can result. Loss of signal integrity caused by incorrect bend radius is
difficult to diagnose.

Safety Messages

Voltage:
Risk of injury by electric shock
Before working on this equipment, be aware of good safety practices and the hazards
involved with electrical circuits. Use only power cords that have a grounding path. Ensure
that the switch is properly grounded before powering on the unit.
Warning:
Risk of eye injury by laser
Fiber optic equipment can emit laser or infrared light that can injure your eyes. Never look
into an optical fiber or connector port. Always assume that fiber optic cables are connected to
a light source.
Warning:
Installation must be performed by qualified service personnel only. Read and follow all
warning notices and instructions marked on the product or included in the documentation.
Warning:
This product relies on the building installation for overcurrent protection. Ensure that a fuse
or circuit breaker no larger than 120 V AC, 15 A U.S. (240 V AC, 10 A international) is used on
the phase conductors.
Caution:
This device is a Class A product. In a domestic environment, this device can cause radio
interference, in which case the user may be required to take appropriate measures.
Caution:
When mounting this device in a rack, do not stack units directly on top of one another in the
rack. Each unit must be secured to the rack with appropriate mounting brackets. Mounting
brackets are not designed to support multiple units.
Regulatory Information
Safety Messages
July 2010 21