Panasonic HDC-SD40 Bedienungsanleitung Seite 34

5
(Only when setting the region of your
travel destination)
Select your travel destination
using / and press the
2 1
ENTER button.
≥ Press 3 to set daylight saving time.
appears and the summer
time setting is turned on. The travel
destination time and time difference
from the home region time are set
forward by one hour. Press 3 again
to return to the normal time setting.
≥ Close the setting by pressing the
MENU button.
time of the travel destination is indicated.
To return the display to the home setting
Set the home region using step 1 to 3, and close the setting by pressing the MENU button.
≥ If you cannot find your travel destination in the area shown on the screen, set it by using
the time difference from your home region.
[DATE/TIME]
It is possible to change the date and time display mode.
[DATE FORMAT]
It is possible to change the date format.
[ECONOMY]
When about 5 minutes have passed without any operation, this unit automatically turns off to
save battery life.
≥ The power save function will not activate when:
j connected to AC adaptor
j using the USB cable for PC
j PRE-REC is used
34
VQT3K06
appears and the
[OFF]/[D/T]/[DATE]
[Y/M/D]/[M/D/Y]/[D/M/Y]
[OFF]/[5 MINUTES]
C The local time at the selected travel
destination
D The time difference between the
travel destination and the home
region

