Turning The Unit On/Off; Turning The Unit On And Off With The Power Button; Turning The Unit On And Off With The Lcd Monitor - Panasonic HDC-SD40 Bedienungsanleitung

Preparation

Turning the unit on/off

You can turn the unit on and off using the power button or by opening and closing the LCD
monitor.
A clicking sound is heard when the unit is shaken.
≥ This is the sound of the lens moving and is not a defect.
This sound will no longer be heard when the unit is turned on and change the mode to
.

Turning the unit on and off with the power button

Press the power button to turn on the unit.
A The status indicator lights.

Turning the unit on and off with the LCD monitor

Unit is turned on when the LCD monitor is opened, and unit is turned off when it is closed.
During normal use, opening and closing of the LCD monitor can be conveniently used
to turn the unit on/off.
∫ To turn on the unit
A The status indicator lights.
≥ The unit will not turn off while recording motion pictures even if the LCD monitor is closed.
≥ In the following cases, opening the LCD monitor does not turn on the unit. Press the power
button to turn on the unit.
j When the unit is purchased
j When you have turned off the unit using the power button

∫ To turn off the unit

B The status indicator goes off.
To turn off the unit
Hold down the power button
until the status indicator
goes off.

19
VQT3K06