Lcd-Monitor - Panasonic HDC-SD40 Bedienungsanleitung

About the SD card
When disposing of or giving away the SD
card, note that:
≥ Formatting and deletion of this unit or
computer only changes the file
management information and does not
completely delete the data in the SD card.
≥ It is recommended that the SD card is
physically destroyed or the SD card is
physically formatted using this unit when
disposing of or giving away the SD card.
/
To physically format the SD card, connect
the unit via the AC adaptor, select
[SETUP] # [FORMAT CARD] # [YES]
from the menu, and then press and hold
the delete/video light button on the screen
below for about 3 seconds. When the SD
card data deletion screen appears, select
[YES], and then follow the on-screen
instructions.
To physically format the SD card, connect
the unit via the AC adaptor, select
[SETUP] #[FORMAT MEDIA] # [SD
CARD] from the menu, and then press
and hold the delete/video light button on
the screen below for about 3 seconds.
When the SD card data deletion screen
appears, select [YES], and then follow the
on-screen instructions.
≥ The customer is responsible for the
management of the data in the SD card.
104
VQT3K06
LCD monitor
≥ When the LCD monitor gets dirty, wipe it
with a soft cloth, such as eye glass
cleaner.
≥ In a place with drastic temperature
changes, condensation may form on the
LCD monitor. Wipe it with a soft cloth,
such as eye glass cleaner.
≥ When the unit has become very cold, for
example due to storage in a cold area, its
LCD monitor will be slightly darker than
usual immediately after the unit is turned
on. The normal brightness will be restored
when the unit's internal temperature rises.
Extremely high precision technology is
employed to produce the LCD Monitor
screen featuring a total of approximately
230,000 dots. The result is more than
99.99% effective dots with a mere 0.01%
of the dots inactive or always lit.
However, this is not a malfunction and
does not affect the recorded picture.