Aerfast ANS21131 Betriebsanleitung Seite 17

Disconnect the tool when performing repairs or clearing jams.
MAINTENANCE TABLE
ACTION
Drain air line filter
(daily).
Keep lubricator filled.
Clean filter
element-then blow air
through filter in
direction opposite to
normal flow.
Check that all screws
on tool are tight.
Keep work contacting
element working
properly.
Keep magazine and
feeder mechanism
clean.
Lubricate "O" rings
that are replaced.
Use only
recommended
replacement parts.
CAUTION
WHY
Prevent accumulation
of moisture and dirt.
Keep tool lubricated.
Prevent clogging of
filter with dirt.
Prevent air leakage
and promote efficient
tool operation.
Promote operator
safety and efficient
tool operation.
Prevent jamming of
fasteners.
Assure long life and
proper operation of
tool.
Keep tool operating
efficiently.
-15-
MAINTENANCE
HOW
Open manual petcock
(most air supply
systems have such a
valve).
Fill with recommended
air tool lubricant.
Wash with soap and
water or follow
manufacture's
instructions.
Check screw daily.
Blow clean daily.
Blow clean daily.
Use lithium grease or
equivalent.
Order any
replacement parts
needed from local
service center dealer.