Engaging Gears; Jolly Professional - GOLDONI JOLLY series Bedienung Und Instandhaltung

engine being started with a gear engaged.
Start the engine following the instructions given in the engine Operating and
Maintenance Manual.
For models with an electric starter, turn ignition key n.11 fig.9 to 1 (fig.12), then
turn the key to 2. Release the key as soon as the engine has caught and it will
automatically return to 1.
Pull the clutch lever again to disengage retainer A so that both the Motorstop
and the clutch lever are optional.
STOPPING THE ENGINE
Release Motorstop lever B fig.3.
For models with electric start, turn the ignition key fig.12 to 0.
If the machine has to stand with its lights on, turn the ignition key fig. 12 to P.
The Motorstop is a safety device to prevent the machine from running
away out of operator control.

4.2 ENGAGING GEARS

The cultivator has 4 gears (3 forward and 1 reverse). Gears are engaged with
lever n.3 fig.1, following the directions on the sticker by the lever.
To drive the machine forward, pull in the clutch lever 6 fig.1, select the gear for
the work to be done, release the clutch slowly and accelerate (n.5 fig.1) the
engine gradually.
WARNING Do not hold the clutch lever in for a long time as this will cause
excessive wear on the thrust bearing.

4.2.1 JOLLY PROFESSIONAL

The rotary cultivator, in addition to the forward gears, also has a reverser that
gives three forward and 1 reverse gear for both driving directions.
Driving direction, depending on the implements mounted is selected with lever
n.1 fig.4:
Lever to the left: normal driving direction (rotary cultivating).
Lever to the right: reversed driving direction (mowing).
Engage the reverser with the engine off and a gear engaged. Turn the engine
pulley slightly by hand.
45