Intended Use; Personnel Qualification - WIKA 232.50.100 Betriebsanleitung

2. Safety
EN

2.1 Intended use

These pressure gauges are used for measuring pressure within hazard-
ous areas in industrial applications.
The pressure gauge has been designed and built solely for the
intended use described here, and may only be used accordingly.
The manufacturer shall not be liable for claims of any type based on
operation contrary to the intended use.

2.2 Personnel qualification

6
In order to guarantee the measuring accuracy and
long-term stability specified, the corresponding load limits
must be observed.
Non-observance can result in serious injury and/or
damage to equipment.
Further important safety instructions can be found in the
individual chapters of these operating instructions.
WARNING!
Risk of injury should qualification be insufficient!
Improper handling can result in considerable injury and
damage to equipment.
The activities described in these operating instructions
„
may only be carried out by skilled personnel who have
the qualifications described below.
WIKA operating instructions pressure gauge, model 2 per ATEX