Configuring The Balance; Setting The Parameters (Menu Codes) - Denver Instrument Timberline Tp-214 Betriebsanleitung

Configuring the Balance

Setting the Parameters (Menu Codes)

You can configure your balance to meet individual requirements by selecting
from the parameters available in the menu.
Example: Adapt the balance to unstable ambient conditions
Menu code 1. 1. 4
Step
1. Turn off the balance
2. Turn the balance back on;
while all segments
are displayed
$ To navigate within a menu
level; the last menu option is
followed by the first option
3. Select the 2nd menu level
4. Select the 3rd menu level
5. In Menu Level 3:
Select the desired option
6. Confirm new setting;
the "o" indicates the currently
set option
$ Select the next menu level
(here: move from the 3rd to
the 1st level)
$ Set other menu codes, if desired [PRINT], [TARE]
7. Store parameter settings
and exit operating menu
or
$ Exit operating menu
without storing changes
> Restart the application
Key (or instruction)
[ON/OFF]
[ON/OFF]
[TARE] briefly
[TARE]
repeatedly
[PRINT]
[PRINT]
[TARE] repeatedly
[PRINT] >2 sec.
[PRINT]
[TARE] >2 sec.
[ON/OFF]
Display
1.
2.
· · ·
9.
1.
1. 1.
1. 1. 2
o
1. 1. 4
1. 1. 4
o
1.
0.0
g
17