kiwy SF01 Montageanleitung Seite 8

- Never use this child seat unless you have properly positioned it inside
the vehicle, using the seat belt and the connectors for the Isofix
anchoring points, if the latter are equipped in your vehicle, as instructed
in this user manual.
- Do not use the SF01 seat placed in a different direction from that
prescribed, based on the weight of the child.
- Do not install the car seat in the opposite direction to the direction of
travel on seats fitted with frontal airbags; the impact between this
device and the child seat, in the event of an accident, could be
extremely dangerous for your child.
- IMPORTANT: Vehicles of recent manufacture allow you to disable the
front airbag on the passenger side, to allow the installation of this type
of child seats. Do not proceed with installation until you have carefully
read the instruction manual of your vehicle.
- Do not place any kind of padding in the area of contact between the
child seat and the vehicle seat, in order not to jeopardize the stability
and proper positioning (of the child seat) with respect to the safety seat
belt, which fixes it to the vehicle seat.
- Do not make any modifications of any kind to the child seat. Any
modifications not performed or authorized by the manufacturer would
void the validity of the approval.
- For the same reason, spare parts or accessories that are not supplied
directly by the manufacturer of the car seat itself cannot be used.
- Never leave any child unattended in the vehicle, even for short periods
of time.
- The buckle of the seat is a primary component for safety; discourage
your child from playing with it.
- Do not install or remove the seat from the car with the child inside.
- The fabric covers are an integral part of the product and must always
be present on the child seat; replacing them with others provided only
by the manufacturer when too worn out.
6