Compac WD Mobile Bedienungsanleitung Seite 3

Labelling:
The unit is equipped with a CE plate.
Before assembly:
After opening the packaging, check the product for visible damage or cracks. If possible, reuse the
packaging or dispose of it at a recycling centre.
Assembly:
Bag contents:
2 cotter pins
1 nut
1 screw
2 locknuts
1 washer
Box contents:
1 frame
1 push bar, upper
1 push bar, lower
1 support foot
2 castors
See assembly instructions.
Maintenance:
Check, clean and lubricate all mobile parts once a month. In case of rust, remove the rust from the
unit and apply rust protection. Check that locknuts, nuts, bolts, castors and mandrels are intact.
When replacing parts, be sure to use original parts.
Disposal:
Dispose of the unit through an authorized waste recipient.
3 March 2008
TK/VL.
A
B
C
D
E
F
G
H
I
J
Fig. 1