Werbung
Verfügbare Sprachen
Verfügbare Sprachen
See lubricating instructions fig. 3.1, or the sticker with the lubricating instructions on the car lift.
The vehicle lift must be regularly serviced as listed.
Once a year the lift must be subjected to a highly detailed check and inspection.
You can have the car lift professionally checked by STERTIL mechanics by entering into a maintenance contract.
Maintenance and inspection
Cylinder
Check oil level in reservoir
Pawls and control rods
Slack-cable safety device
Steel cables/chain
Guiding parts of post
Several pivot points
C`9S6VGD8ÃPDG
It is strongly recommended that the hydraulic oil be changed at least every 2 years, irrespective of the amount
of use to which the lift is subjected.
PDGÃ8C6IBDIB
1. Lower lift to fullest extent and drain all the oil.
2. Refill with hydraulic oil Hydran 46 (46 cSt bij 40°C), filtered at 4 micron max.
During inspection and maintenance the vehicle lift should be in the lowest position and the main switch
should be turned off. This means that the main switch should be turned to the 0 position and is to be secured
with a padlock.
The current should be turned on again only for the adjustments and checks that require it.
Description
Lubricate dry piston rod, if any
Top up (with vehicle lift at ground level only)
Lubricate centres of rotation
Lubricate centres of rotation
Grease
Grease
Grease
Model
KS 2028 A/D/F
Litre
6
26
Monthly
yearly
X
X
X
X
X
X
X
Werbung
