Mechanical Installation; Important Notes; Mounting Steps - Lenze L-force EZS3 serie Montageanleitung

5

Mechanical installation

5.1

Important notes

The mounting location must always comply with the operating conditions
ƒ
specified in the technical data (¶ 28). Take additional measures if
necessary.
The mounting plate of the control cabinet must have the following
ƒ
properties:
–
electrically conductive
–
free of lacquer
The mechanical connections must always be ensured.
ƒ
A free air circulation must be ensured for dissipating the heat.
ƒ
(
Stop!
Heavy device weight
The device is very heavy and must be lifted for the mounting.
Possible consequences:
ƒ
ƒ
Protective measures:
ƒ
ƒ
ƒ
5.2

Mounting steps

How to install the filter:
1. Screw down the fixing brackets of the filter at the mounting place.
The mounting place and material must ensure a durable mechanical
connection.
EDKZS3−480A200 DE/EN/FR/ES/IT 3.0
Injury to persons, particularly backache when lifting and holding
the device, respectively
Injury to persons and damage to material assets due to the
device falling down
The device must only be carried with a load bearing system such
as an indoor crane permitted for the device weight
Before the transport, the hoist, the load bearing system and
lifting accessories must be checked for sufficient payload and
faultless status
Do not remove the hoist and the lifting accessories until the
device lies safe on a stable surface or is finally mounted.
l
Mechanical installation
Important notes
5
31