Safety Measures - Vitek VT-2312 Y Betriebsanleitung

VT-2312_IM_70x130.indd 3
HAIR STRAIGHTENER VT-2312 Y
The unit is intended for hair straightening.
DESCRIPTION
1. Heating plates and outer operating surfaces
2. Handle
3. Temperature control buttons «+/–»
4. ON/OFF button
5. ON/OFF indicator of the heating element
6. Protection cap
IMPORTANT SAFETY MEASURES
ATTENTION!
• Do not use the unit near containers filled with water
(such as bath, swimming pool etc.).
• After using the unit in a bathroom, unplug it by taking
the power plug out of the mains socket, as closeness
of water is dangerous, even if the unit is switched off.
• For additional protection you can install a residual current
device with nominal operation current not exceeding 30
mA into the mains; contact a specialist for installation.
• Make sure that the heating plates do not touch fus-
ible and inflammable objects (plastic, polyethyl-
ene, synthetic materials etc.).

SAFETY MEASURES

Before using the unit, read this instruction manual carefully
and keep it for future reference.
Use the unit for intended purposes only, as specified in
this manual. Mishandling the unit can lead to its breakage
and cause harm to the user or damage to his/her property.
• Before switching the unit on, make sure that your home
mains voltage corresponds to the unit operating voltage.
• Do not switch the unit on in places where aerosols are
sprayed or highly inflammable liquids are used.
• It is recommended to unwind the power cord to its full
length while using the unit.
• The power cord should not:
– touch hot objects,
– be immersed into water,
– run over sharp edges of furniture,
– be used as a handle for carrying the unit.
ENGLISH
3
28.07.2014 11:35:01