Styling; Cleaning; Storage - Silvercrest SHGB 50 A1 Bedienungsanleitung

5.2

Styling

The right temperature
WARNING!
Hair can be damaged by excessive
temperature, excessively long contact
or too frequent straightening. Particular-
ly at higher temperatures, you should
not treat the same strand of hair more
than once.
Recommended
Hair texture
bleached, dyed
blonde
fine, dyed
normal to strong, not
chemically treated
• Start with the lowest temperature that is
recommended for the hair texture to be
treated.
• Increase the temperature in small steps
if the straightening process is taking too
long.
Straightening
1. Dry your hair.
2. Comb the hair well.
3. Start with the lowest temperature that is
recommended for the hair texture to be
treated (see table).
4. Separate one strand and brush it
smooth. Brush evenly from the hairline
to the tips of the hair. Do not stay in any
one spot for too long. Ensure that you
keep a sufficient distance from your
scalp!
5. Straighten all of your hair in this way,
strand by strand.
6. Switch the device off using the on/off
button 3, and allow the device to
cool down.
7. Disconnect the mains plug 1 from the
wall socket.
8. Allow the hair to briefly cool before you
treat it further e.g. with styling or care
products.

6. Cleaning

Pull out the mains plug 1 from the wall
socket before cleaning the hair straight-
ening brush.
temperature
Allow the device to cool down before
cleaning.
100 - 120 °C
WARNING! Risk of material dam-
age!
120 - 140 °C
Do not use any astringent or abrasive
cleaning agents.
140 - 180 °C
• Hairs that are tangled in the bristles
should ideally be pulled off using your
fingers.
• Clean the device regularly. Wipe down
the housing of the device with a damp
cloth.

7. Storage

WARNING! Risk of material damage!
Do not wrap the cable around the de-
vice (risk of cable damage!).
• Allow the device to cool down.
• You can use the hook loop 2 to safely
and practically hang up the device for
storage purposes.
DANGER! Risk of electric shock!
GB
7