Add A Wi-Fi Network - Datalogic Skorpio X4 Bedienungsanleitung

Settings

Add a Wi-Fi Network

1. Tap Settings, verify the Wi-Fi is turned on and then tap Wi-Fi.
2. Tap the Add Network icon ' + ' located at the bottom of the
available Wi-Fi network list:
3. Enter the Network SSID (Wi-Fi network name). For secure Wi-Fi
network connections, tap None under Security, and then select
the type of security protocol required from the pop-up menu (e.g.,
WEP, WPA/WPA2 PSK or 802.1xEAP). Enter any additional
security information required by the type of security protocol
selected.
4. Tap Save.
60 Skorpio™ X4