Datalogic Skorpio X4 Bedienungsanleitung Seite 162

Datalogic Applications
4. Scan any label in your Scan2Deploy label set.
Some configurations are small enough to fit on only one
barcode label, and others may have many barcodes to
scan.
NOTE
5. Continue to scan all barcodes on the list. Once the last label is
scanned, the configuration will be put into effect, and an
on-screen notification will confirm that your configuration is
complete.
6. Tap Home to exit.
View Device Info for a Connected Device
You can view information about a device that is connected to DXU.
This information includes the capabilities of the device's Wi-Fi radio,
the type of barcode scanner it has, the OS version, the battery type
and state of charge, the firmware version and the version of the
Datalogic Enterprise SDK.
To view information about the device you are connected to:
1. Load the configuration from a connected device.
2. Click Device Info.
3. Click the Back button (a leftward pointing arrow in a circle) to
return to the DXU main window.
View Device Info Recorded in a Configuration File
You can view information about the device from which a
configuration file was extracted. This information includes the
capabilities of the device's Wi-Fi radio, the type of barcode scanner it
has, the OS version, the battery type and state of charge, the
firmware version and the version of the Datalogic Enterprise SDK.
154 Skorpio™ X4