Simplified Deploy - Datalogic Skorpio X4 Bedienungsanleitung

Datalogic Applications

Simplified Deploy

DXU desktop can be configured to enable the Datalogic out-of-box
experience Simplified Deploy, using Scan2Deploy. With Simplified
Deploy you can automatically connect your device to the network and
provision it. The Scan2Deploy button on DXU desktop can be used to
print barcodes that allow factory reset (Android) or clean boot (WEC7)
devices to automatically connect to Wi-Fi, update their firmware,
configure the device, and install applications.
In order for Simplified Deploy to function:
• The PC where DXU desktop is installed must be accessible
from the Wi-Fi network.
• There must be a Manifest File, a text file located in the folder
C:\Datalogic\DXUManifests.
• A Simplified Deploy barcode must be generated and printed
using the Scan2Deploy button on DXU desktop.
Manifest File
Manifest Files are text .ini files indicating which firmware versions to
update devices to ([update] tag), which DXU configuration file to apply
([config] tag), and which .apk (Android) and .cab (WEC7) file
applications to install ([install] tag). It is recommended that [update]
tags be in separate manifest files. You can specify more than one
DXU configuration file to apply and more than one application to
install.
Additionally, you can have more than one active manifest files on the
PC where DXU desktop is installed, each with its' own Simplified
Deploy Barcode to be used by Scan2Deploy utility on the device. In
this way you can easily have devices provisioned for different tasks.
By default, firmware, configuration files, and applications are
assumed to reside in the C:\Datalogic\DXUManifests folder. If they
don't, the Manifest File entry must specify the path.
120 Skorpio™ X4