Led Indicators - Datalogic Skorpio X4 Bedienungsanleitung

Getting Started

LED Indicators

The LEDs illuminate to indicate various functions or errors on the
reader. The following tables list these indications.
LED
Charging LED
(left side)
Keyboard LED
(center)
Good Read
*
LED
(right side)
* The Good Read LED has also a "Suspend LED" feature. The decode LED will glow red when
the device begins to suspend, and will turn off when the suspend completes success-
fully.
56
Status
Red Constant
Green Costant
Red Blink
Off
Yellow Constant
Blue Constant
Red
Green
Description
Light is solid red while charging.
Light is solid green once the charging
process has completed (full charge).
Blinking red indicates a charge fault.
Keyboard in primary.
Yellow alternate key mode.
Blue alternate key mode.
Light is red from the time the user
presses the scan key (or trigger) until
the barcode is decoded (1D models),
until the scanner times out (2D imager
models).
Light changes to green when a good
decode is completed.
Skorpio™ X4