Datalogic Skorpio X4 Bedienungsanleitung Seite 126

Datalogic Applications
Add Device
This button opens the Add Device dialog box which allows you to type
the IP address of a device. This dialog box does not support DNS
naming of devices. You can also use a custom TCP port if you have
configured your device to use one in DXU Agent. For convenience, this
field pre-populates with your PC's IP subnet. You need only to type in
the last number of your device's IP address if it is in the same subnet
as your PC.
This dialog box allows you to manually connect to devices running
DXU Agent that are either inside your PC's subnet or outside it. The
limitation is that devices on other subnets must be on a subnet that
is routable from your PC's subnet. Consult with your network expert
for more information.
Once connected, devices that respond to DXU's query over the
network will display in the Available Devices list.
Load Configuration
Clicking the Load Configuration button opens a standard file dialog
box that allows you to explore for and select a DXU configuration file.
Loading a configuration allows you to edit a device's configuration
when the device is not connected to DXU. This also allows you to
save copies of this configuration to new locations or file names, so
118 Skorpio™ X4