Imager 2D Data Capture - Datalogic Skorpio X4 Bedienungsanleitung

Imager 2D Data Capture

The imager uses digital camera technology to take a digital picture
of a barcode, the image is stored in memory and software decoding
algorithms are executed to extract the data from the image. The
omni-directional scanning does not require that the operator orient
the barcode to align with the scan pattern.
To scan a barcode symbol:
1. Point the scan window at the barcode from a distance within the
reading range.
2. Press the scan key or the pistol trigger. The imager projects a
laser aiming pattern similar to those used on cameras. The
aiming pattern is used to position the barcode or object within
the field of view.
3. Center the symbol in any orientation within the aiming pattern.
Ensure the entire symbol is within the rectangular area formed
by the brackets in the aiming pattern, then either wait for the
timeout or release the scan key to capture the image. A red
beam illuminates the symbol, which is captured and decoded.
User's Manual
Data Capture
181