Touchscreen Calibration - Datalogic Skorpio X4 Bedienungsanleitung

Touchscreen Calibration

After any reset of the Skorpio X4, the device will start and you will be
asked to calibrate the screen (see
information).
Also, you might need to recalibrate the touchscreen (i.e. when the
screen does not respond properly to commands).
To recalibrate the touch screen, follow the steps below:
1. Tap All Apps (
2. Tap/touch the screen to start calibration. Carefully press and
briefly hold the stylus on the center of the target. Repeat as the
target moves around the screen.
User's Manual
) > Touchscreen Calibration:
Keyboards on page 43
Getting Started
for further
41