tanning essentials Rapid Schulungsanleitung Seite 7

SPRAY APPLICATOR MAINTENANCE GUIDE
STEP 1
Remove hose.
STEP 2
Unscrew solution cup and empty any excess solution. It is recommended
that this be done over a sink or a wet area.
STEP 3
Rinse the empty solution cup with warm water.
STEP 4
Refill the cup with warm water and screw back into the applicator, fix the
solution dial to 'C' and spray until the water runs clear. Rinse and repeat if
required
STEP 5
Empty solution cup and re-set the solution dial on the back of the gun to
the regular spray setting.
STEP 6
Wipe any excess water from the applicator with a cloth and leave out
to dry.
AUSTRALIA | CHINA | UNITED KINGDOM | USA
www.tanningessentials.co