tanning essentials Rapid Schulungsanleitung Seite 5

SPRAY UNIT
AUSTRALIA | CHINA | UNITED KINGDOM | USA
STEP 1
Attach hose to unit. Pull connection back exposing the prongs,
ensuring the groove is facing the top, line up the prongs to meet
the unit, release the connection and screw in clockwise until firmly
in place and sitting straight.
STEP 2
Attach Power cord and turn power on at the wall switch.
STEP 3
Turn on your unit and choose your desired settings. Recommended
power setting is 3 depending on the solution and speed of
application. The unit is controlled via touch technology that is
located on the front of the spray unit.
www.tanningessentials.co