tanning essentials Rapid Schulungsanleitung Seite 4

SPRAY APPLICATOR
AUSTRALIA | CHINA | UNITED KINGDOM | USA
STEP 1
Unscrew the solution cup and fill ¾ full. Overfilling the solution cup
may cause leaks.
STEP 2
Insert solution cup and screw tightly.
STEP 3
Set nozzle by turning. Vertical position for up and down and
horizontal position for left to right spraying.
STEP 4
Adjust solution dial on the back of the applicator to choose the
amount/flow of solution you would like to dispense. A higher setting
will result in more solution being distributed. Setting your applica-
tor on 2-4 for the body and 2 for the face are best recommended.
STEP 5
Attach hose ensuring the flat edge of the socket is facing upright.
Align the prongs from the hose into the applicator fittings and screw
the connection clockwise until firmly in place.
www.tanningessentials.co