18
1
44
In order to be able to rotate the seat shell into forward-facing
position, please proceed as follows:
• Adjust the headrest into 7th position or higher, so that the
red line on the indicator (1) behind the headrest can not be
seen anymore.
• Now pull the position adjustment handle (18) and while
keeping the handle pulled, bring the seat shell into a
completely upright position.
• Now you can rotate the seat shell forward-facing.
NOTE! Make sure that the seat shell is correctly locked into
place by trying to rotate it, without pressing the adjustment
handle (18).
NOTE! We suggest to kindly deactivate the L.S.P. before
rotating the seat. For details see chapter „ADJUSTING THE
SIDE PROTECTORS".
NOTE! Avoid getting any dirt or sand in between the upper
seat shell and the base. This can have a negative impact on
the performance of the rotation and recline function. Should
this happen the dirt should be removed before rotating and
reclining the seat any further to avoid any permanent damage
!
of the seat.
WARNING! While travelling the car seat must always
be locked in the rearward-facing or forward-facing posi-
tion. Never use the seat in the loading position or in any
unlocked intermediate position while travelling.