Installation; Auto Restart - Njoy Septu-Serie Bedienungsanleitung

3

Installation

The UPS can protect your equipment from all power
problems such as surge, spikes, blackouts, brownouts
and line noise. When AC power is present and the ON/OFF
switch is turned ON, the UPS is always charging the battery
and provides power to the equipment from AC line directly.
A reliable built-in battery can provide stable power in
order for you to complete your work, save your data and
safely shut down your system when there is a utility power
blackout.
The UPS is simple to operate and install. Please read the
following steps before connecting any equipments to this
UPS:
3.1 Connecting your equipment and first usage
Step 1.
Connect the UPS to a grounded AC power outlet.
Step 2.
Please turn ON the ON/OFF switch and charge the
battery at least 8 hours for a full load before you
start to use the UPS.
Step 3.
Plug your PC or peripheral equipment (printer, tv,
scanner, fax, speakers etc.) into the power outlets
of the UPS
(these will provide emergency battery
backup power during blackouts as well as surge
protection from surges and spikes).
4
CAUTION
Do NOT plug
LASER PRINTERS
into any of the
outlets.
Step 4. Connect the phone line cables to the RJ-11
outlet.
3.2 General Specifications
ǘ Automatic voltage regulation
Regulates the input voltage and eliminates
the problems created by under-voltage or
over-voltage fluctuations. It also protects
against spikes and surges that comprise over
80% of power problems.
ǘ Auto restart
The UPS will restart automatically and will start
charging the batteries once the electricity is back
on.
ǘ Cold Start Function
When the UPS is OFF and there is no connection
to the power utility, it's still possible to start the
UPS unit using the remaining battery power.
Do NOT plug any
SURGE STRIPS
into any of the
outlets.
5