Si629 P (Panel Mount); Assembly - Hach LANGE si629 P Bedienungsanleitung

3. Installation

3.2. si629 P (panel mount)

DANGER
Only qualified personnel should conduct the tasks described in this section of the manual.

3.2.1. Assembly

For the si629 P mounting a drill hole is required according to the diagram.
After putting the instrument in the panel, it must be fitted using two clamps as indicated in the figure.
21 mm
BNC connector
for electrode
Plug-in screw connector
10
si629 P_HACH_LANGE_Ed.0510.indd ANG:10 si629 P_HACH_LANGE_Ed.0510.indd ANG:10
92 mm
Drill hole
80 mm
0.8"
Side view
3.7"
Panel
3.1"
Clamp to fix to the panel
7 mm
0.3"
20/5/10 13:00:48 20/5/10 13:00:48