Connection To Your Pc - Olympus DR-1000 Bedienungsanleitung

Connection to Your PC

Be sure to install the DSS Player software before connecting the
Directrec to the PC. However, if you do connect the Directrec before or
during the software installation, the "Add New Hardware Wizard" will
appear. In this case, cancel the wizard by pressing the [Cancel] button
in the wizard screen and then install or continue the installation of DSS
Player software.
Connecting to your PC Using the USB Cable
Disconnecting from Your PC
1
Disconnect the Directrec USB cable from your PC USB port or
USB hub.
..............................................................................................................................
Notes
• Some PCs and USB hubs may not supply sufficient power and the Directrec fails to
connect. Refer to your PC User's Manual regarding the USB port or USB hub on your PC.
• When using a USB hub to connect the Directrec, always use a self-powered (AC adapter)
USB hub.
• Never disconnect the USB code while the record/play indicator light is flashing. If you do,
the data will be destroyed.
10
1
Connect the Directrec USB
cable directly into the USB
port or USB hub of your PC.
When the DSS Player is activated,
the icon will appear in Device
Tree View (☞P.12) of the DSS
Player.