Servicing And Maintenance - HTC 130 Bedienerhandbuch

Servicing and maintenance

 After use, clean the machine with a damp sponge or cloth.
 NOTE: Do not hose down the machine, since moisture may penetrate electrical parts and
damage the drive system.
Service intervals
Yearly:
Two-yearly:
Only authorised personnel properly trained by HTC Sweden AB are permitted to carry
For other servicing instructions, see the HTC service manual for the HTC 130. The manual is
issued during training at HTC Sweden AB.
HTC 130
Thoroughly check pulleys, seals, ball bearings and drive shaft to
ensure that they are in good condition and undamaged. We
recommend changing the seals and lubricating the machine at the
annual inspection.
Change the drive belt
NOTE:
out maintenance on the machine.
24