Certificate Of Conformity; Annex To Certificate Of Conformity - HTC 130 Bedienerhandbuch

Type of equipment
Make
Brand
Serial number
Manufacturer
HTC Sweden AB
Box 69
614 22 Söderköping, Sweden
Documents used to verify conformity are listed in an annex.
Further information on the EMC Directive
This equipment conforms to the harmonised EMC standards stated in the annex (heavy industry).
Further information on the Low-Voltage Directive
The product conforms to good safety engineering practice within the EEA, even if it does not fully conform to the standards and other
technical specifications stated in the annex.
We have an internal quality assurance system which ensures conformity between the manufactured product and the technical documentation.
The product has been CE-marked in 1999.
Further information on the Machine Directive
Certificate of conformity in accordance with Appendix 2A.
The product conforms to the Machine Directive 98/37/EG and annexes.
As manufacturer, we certify on our own responsibility that the product conforms to the stipulations of the above Directives.
Date: 20/09/99
Håkan Thysell
Managing Director
The following harmonised standards were applied:
Standards
SS-EN 60204-1
SS-EN 50081-2
SS-EN 50082-2
The following company standards or other technical specifications were applied:
Standards/specifications
HTC130
HTC 130

CERTIFICATE OF CONFORMITY

in accordance with
EMC 89/336/EEG, LVD 73/23/EEG, MD 98/37/EG
Grinder
HTC 130
HTC 130
___________________
CERTIFICATE OF CONFORMITY
Annex to
Date
-
-
-
Date
20/09/99
18
Note
-
-
-
Note
-