Makita UN490D Betriebsanleitung Seite 6

............... Wear sturdy boots with nonslip soles.
Steeltoed safety boots are
recommended.
....... Keep working area clear of persons and
)
pets.
................ Beware of pinching.
......... Beware of electrical line. Risk of electrical
shock.
Cd
......... Only for EU countries
Ni-MH
Li-ion
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries and
Accumulators and Waste Batteries and
Accumulators and their implementation in
accordance with national laws, electric
equipment and batteries and battery
pack(s) that have reached the end of
their life must be collected separately and
returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for trimming hedges.
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Pole Hedge Trimmer
Model No./ Type: UN490D, BUN490
Specifications: see "SPECIFICATIONS" table.
are of series production and
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN ISO 10517
6
The technical documentation is kept by:
Makita International Europe Ltd.
Technical Department,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
The conformity assessment procedure required by
Directive 2000/14/EC was in Accordance with annex V.
Measured Sound Power Level: 93.2 dB (A)
Guaranteed Sound Power Level: 95 dB (A)
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
ENE014-1
Save all warnings and
instructions for future reference.
ENH021-7
CORDLESS POLE HEDGE
TRIMMER SAFETY WARNINGS
Preparation
1. THIS HEDGE TRIMMER CAN CAUSE SERIOUS
INJURIES. Read the instructions carefully for the
correct handling, preparation, maintenance, starting
and stopping of the tool. Become familiar with all
controls and the proper use of the tool.
2. DANGER - Keep hands away from blade.
3. Keep all parts of the body away from the cutter blade.
Do not remove cut material or hold material to be cut
when blades are moving. Make sure the switch is off
when clearing jammed material. Blades coast after
turn off. A moment of inattention while operating the
tool may result in serious personal injury.
4. Carry the tool by the handle with the cutter blade
stopped. Proper handling of the tool will reduce
possible personal injury from the cutter blades.
5. Only use with handle and guard properly assembled
to the tool. The use of the tool without the proper
guard or handle provided may result in serious
personal injury.
6. Never allow children to use the tool.
7. Beware of overhead power lines.
8. Avoid operating while people, especially children, are
near by.
9. First-time users should have an experienced user
show them how to use the tool.
11. 3. 2013
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
GEA010-1
GEB111-1