Machine Information - Ferm RSM1018 Originalbetriebsanleitung

RECIPROCATING SAW
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive Warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the text refer to the diagrams
on page 2
Read the operating instructions carefully
before using this device. Familiarize
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
Contents

1. Machine information

2. Safety instructions
3. Mounting accessories
4. Operation
5. Service & maintenance
1. MACHINE INFORMATION
Technical specifications
Mains voltage
Frequency
Power input
No-load speed
Saw stroke
Max. saw capacity wood
Max. saw capacity plastic
Max. saw capacity steel
Weight
LpA (sound pressure level)
LwA (sound power level)
Vibration
Vibration level
The vibration emission level stated in this instruction
manual has been measured in accordance with
a standardised test given in EN 60745; it may be
used to compare one tool with another and as a
preliminary assessment of exposure to vibration
when using the tool for the applications mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
signifi cantly reduce the exposure level
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
Contents of packing
1 Reciprocating saw
1 Saw blade for wood 230mm 3TPI
1 Saw blade for wood 150mm 6TPI
1 Saw blade for steel 150mm bi-metal 18TPI
1 Hexagonal key
1 Set carbon brushes
1 Operating instructions
1 Safety instructions
1 Warranty card
Check the appliance, any loose parts and
accessories for damage caused during transport.
Product information
Fig. A
1. Foot plate
230-240 V~ 2. Saw buckle
50 Hz 3. On/Off switch
710 W 4. Lock on knob
0-2700/min 5. Footplate mounting screws
22 mm 6. Carbon brush holder
115 mm
2. SAFETY INSTRUCTIONS
115 mm
5 mm
Explanation of the symbols
2.5 kg
86 + 3 dB(A)
97 + 3 dB(A)
5,29 + 1.5 m/s
2
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
3