Installing The Camera - lidl 271723 Quick-Start-Guide Mit Montage-, Bedienungs Und Sicherheitshinweisen

Keep away from open flames. For example, do not place any
burning candles on or near the device. That way you can avoid
the spread of fire.

Installing the camera

Note: Mount the camera at a height and position at which it cannot
be reached without aid. Proceed likewise with the connecting and
Ethernet cable.
Be sure not to pierce electrical lines or other obstructions during
installation.
Before mounting the product to the wall, check which mounting
materials are suitable for your wall.
Hold the mounting bracket
mounting position and mark the drill holes on the wall using the
predrilled holes.
CaUTION! rISK OF INJUrY! Please refer to your electric
drill's instructions for use.
Now drill the mounting holes (Ø 5 mm). Ensure that you do not
damage the supply line.
Now insert the wall plugs
Secure the mounting bracket
(Fig. A1).
Loosen the wing bolt on the mounting bracket
viewing angle (see Fig. A2).
Then secure the joint by tightening the wing bolt.
Screw the camera
Once the you have turned the camera
bracket so it is connected as tight as possible, turn the triangle
2
nut in the opposite direction to secure the camera
against the wall in the desired
2
into the bore holes.
5
to the wall using the screws
2
onto the mounting bracket
1
and adjust the
2
(see Fig. A3).
2
on the screw in the mounting
1
.
1
6
GB/IE 13