Assembly
NOTE
GB
►
Mount the camera so that it can be reached without aid. The
MT
same applies to the connecting cables. These should ideally
be laid in plastic or metal ducting.
CAUTION
►
When selecting a mounting location for the camera, ensure
that it is not subjected to direct sunlight, vibrations, moisture,
dust, heat or cold.
♦
Using the wall bracket as a template, mark the positions for the
drill holes on the wall.
♦
Drill three holes (ø 6 mm) and insert the wall plugs supplied.
When drilling, ensure that you do not inadvertently damage
power, gas or water lines.
♦
Screw the wall bracket to the wall using the supplied screws.
Setting the camera position
♦
Loosen the locking screw
bracket and align the camera accordingly.
♦
Re-tighten the locking screw
Connecting the camera
The camera has a connecting cable with two cinch sockets
and a low voltage socket
♦
Connect the camera to the corresponding connections
on the extension cable
♦
Connect the cinch plugs
cable
(e.g. a monitor).
♦
Connect the low voltage plug
low voltage socket
♦
Connect the mains adapter
earthed mains socket.
16
.
.
to the audio and video inputs of your display device
of the extension cable
and the knurled nut
and the knurled nut
+
(video and audio) on the extension
of the mains adapter
to a correctly-installed and
on the wall
.
+
to
to the
.
UK 8 A1