BabyGo Symphony Installationsanleitung Seite 13

• Pull the Release button and meanwhile push the child
seat towards the backrest firmly. Shake the child seat
to make sure it is safely attached and re-check the
green safety button to make sure that both of them
are completely green.
• Pull out the Top tether and press the Tether
strap release button to extend the strap un-
til it is long enough to hook the User-ready
tether anchorage behind, the strap need to
go through the Blue Belt Guide.
• Hook the Tether strap hook onto
the User-ready anchorages. Check
there maybe are 3 anchorages for
the hook, please find one in your
favor.
• Pull the Tether strap on the other end back
to tighten the Top tether.
CAUTION
If the Top tether is tightened favorably and correctly,
a green mark will turn up on the other end of the
Strap release button, please do check it.
Car Seat + Isofix
13