Electrolux Iron AidTM EDI97170W Benutzerinformation Seite 9

max
4. Push filler neck and drawer with con-
densed water container back in.
When dry, all textiles not specifically prohibi-
ted in the chapter 'Sorting and preparing
laundry' may be treated with the Iron Aid
Steam System. Wet textiles may only be trea-
ted if they are labelled as suitable for dry pro-
grammes.
Water recirculation system
This system allows you to automatically use
for an Iron Aid Steam cycle the condensed
water collected in the condense water tank
during a drying cycle.
Caution! The water in the condense
water tank will never automatically fill
the steam water tank. The water
recirculation system works only if it is
supplied by water arising during
standard drying cycles.
To activate this system turn the valve to the
ON position. When the valve is ON the
steam water tank will be filled during the
next drying cycle. Water will be supplied by
the water circuit directly to the steam water
tank filling it automatically.
Overview of Iron Aid programmes
Programmes
COTTON
Additional
functions / op-
tions
1.0 kg • •
To activate recirculation set valve to the ON
position. To do that:
1. Pull drawer containing condensed water
container out a little (1). Behind the draw-
er there is water tank's filler neck (2).
2
2. Turn the valve to the ON position. Water
will be supplied by the water circuit di-
rectly to the steam water tank filling it au-
tomatically during the next drying cycle.
The steam water tank is empty. Please fill it
and then press START/PAUSE
If valve is closed (OFF position) recircu-
lation system does not work.
Application/properties
For 1- 6 cotton shirts. Min. 80% natu-
ral fibres (cotton, linen etc).
electrolux 9
1
wet,
dry