Electrolux Iron AidTM EDI97170W Benutzerinformation Seite 26

26 electrolux
Loosen polystyrene parts 3 and 4.
2. Lift slightly rack and take it carefully out
from the drum.
3. Remove right polystyrene part by pulling
it. Inside this part there is a bottle of dis-
tilled water for steam programme purpo-
ses.
4. Remove left polystyrene part by pulling
it. Inside this part there is a canister for
filling distilled water tank for steam pro-
gramme purposes.
Electrical connection
Details on mains voltage, type of current
and the fuses required should be taken
from the type plate. The type plate is fitted
near the loading aperture (see "Product de-
scription" chapter).
Connect the machine to an earthed
socket, in accordance with current wir-
ing regulations.
Warning! The manufacturer
declines any responsibility for
damage or injury through failure to
comply with the above safety
precautions.
Should the appliance power supply
cable need to be replaced, this
must be carried out by our Service
Center.
Warning! The plug must be
accessible after installing the
machine.