Electrolux Iron AidTM EDI97170W Benutzerinformation Seite 19

1. Push down the water tank's filler neck
(1) and pull out it (2).
1
2. Clean the valve/filter under warm water.
3. Re-insert the valve/filter.
4. Turn the valve/filter in ON position.
Clean the door seal
Wipe the door seal using a damp cloth im-
mediately after the Iron Aid or drying cycle.
2
Emptying the condensed water
container
Empty condensed water container after ev-
ery drying cycle. If the condensed water con-
tainer is full, an active programme will break
off automatically and the
light up. In order to continue the pro-
gramme, the condensed water container
must first be emptied.
Warning! The condensed water is
not suitable for drinking or for
preparing foodstuffs.
1. Pull drawer containing condensed water
container all the way out (1) and pull up
the condensed water container's drain-
age pipe as far as it will go (2).
1.
2. Pour out the condensed water into a ba-
sin or similar container.
3. Push drainage pipe in and refit con-
densed water container.
If the programme has been interrupted
as a result of the condensed water con-
tainer being full: Press the START/
PAUSE button to continue the drying cy-
cle.
electrolux 19
icon display will
2.