newmotion Business Lite View Bedienungsanleitung Seite 7

3. PRODUCT INTERFACES
Actual values | 18:03:52
This is the actual time
Actual values | 23.05.2018
This is the actual date
Scan QR code or charge card to start charging
There are 2 ways to start and/or stop a transaction on
this View charge point:
1.
Scan the QR code with your smartphone and follow
the steps online, alternatively you can type the address
as shown below the QR code into the browser of your
device;
2.
Swipe your charge card at the card reader on top of
the charge point;
Hold charge card for history review
You can hold your charge card at the cardreader on
top of the charge point for ~15 seconds to display the
historic sessions for this charge card stored on this
charge point*;
*In case there are no stored historic sessions on this charge point
for this card the charge point will prompt that on the screen;
3.4. RFID CARD READER
The RFID card reader is the part where you present your
RFID card (charge card or key fob), and can be used for
either;
1. Swipe short (~1 sec) for transaction/sessions start or
stop request;
2. Swipe longer (~15 sec) for displaying historic
transactions/session of your charge card/key fob stored
on this Charge point;
USER MANUAL – P7
3.5. SMED STICKER
Each View charge point has a SMED sticker on the side
like indicated which shows the following information;
1. Unique SMED serial-number;
2. Unique public key which can verify it's private key
signature;
3. CE mark;
4. Reference to PTB Baumunsterprufbescheinigung;
5. Reference to MID compliance and accuracy class;
0512NM02INT01