newmotion Business Lite View Bedienungsanleitung Seite 12

4. USER INSTRUCTIONS
4.3. REQUESTING TO DISPLAY
STORED HISTORIC TRANSACTION(S)/
SESSION(S);
All the transactions/sessions that have been made on
the charge point will be stored on a secure internal
storage inside the View charge point SMED.
At any time as a user, for example after receiving your
bill, you can come back to the charge point and check
the historic stored transaction/session details affiliated to
your RFID card (UID) in the following way:
Step 1; Hold the RFID card in front of the reader and
keep it there. After ~5 sec the following screens appear
(keep holding the RFID in front of the reader);
After this, all historic stored transactions/sessions for
this UID stored in this charge point are automatically
shown on the display screens.
You can now verify the legally relevant (stored)
transaction data against for example your bill/invoice.
For ease of use it's recommended to take a picture of
the screen(s).
The stored sessions will be shown in backwards order,
this means most recent transactions/sessions are
shown first and will show in chronological order.
In the bottom of the screen you can see the number of
stored transactions/sessions for this UID on this charge
point and which one is being displayed. In this example
1/12 mean that the most recent transaction/session is
shown of the 12 stored transactions/sessions for this
UID on this charge point.
Each transaction/sessions screen will be shown for ~5
seconds.
USER MANUAL – P12
0512NM02INT01
Keep holding the RFID card in
front of the reader and keep it there
until the screen is completely blue
(~15 seconds in total)