Colour Mode (Colour Or Black/White); Select Section Size - Renkforce DS200-8M Bedienungsanleitung

i) Colour Mode (colour or black/white)
This function is only available when the multi-scanner is in operating mode "PHOTO
SCANNER".
• Push the " " button (7) or the " " button (9) briefly repeatedly until the
corresponding submenu has been chosen; see figure on the right.
• Push the "ENTER" button (8) briefly to confirm.
• Select the desired effect (colour or black/white) with the " " button (7) or the
" " button (9).
• Push the "ENTER" button (8) briefly to confirm.
• Then the preview image will be displayed and you can scan images.
j) Select Section Size
This function is only available when the multi-scanner is in operating mode "PHOTO
SCANNER".
• Push the " " button (7) or the " " button (9) briefly repeatedly until the
corresponding submenu has been chosen; see figure on the right.
• Push the "ENTER" button (8) briefly to confirm.
• Select the desired size for the picture section according to the photograph
that you want to scan.
"5R" = 13 x 18 cm (5" x 7")
"4R" = 10 x 15 cm (4" x 6")
"3R" = 9 x 13 cm (3,5" x 5")
Calling cards
Based on its function principle, the photo inserted cannot be read in to 100% as in a
flatbed scanner. A small edge around the picture will not be scanned.
• Push the "ENTER" button (8) briefly to confirm.
• Then the preview image will be displayed and you can scan images.
46