Recording Mode - Renkforce DS200-8M Bedienungsanleitung

e) Recording Mode
• Push the " " button (7) or the " " button (9) briefly repeatedly until the
corresponding submenu has been chosen; see figure on the right.
• Push the "ENTER" button (8) briefly to confirm.
• After starting the recording mode, a preview image of the inserted slides,
negatives or photographs appears on the display.
• Use the " " button (7) to mirror-invert the image horizontally (left/right) if
it is displayed incorrectly.
When scanning, slides or negatives, ensure that they are inserted into the respective
holder correctly. The materials thickness of slides or negatives may reduce the scan
quality if they are inserted incorrectly in the holder.
• Use the " " button (9) to mirror-invert the image vertically (top/bottom).
• Push the "ENTER" button (4) to adjust the
brightness of the red, green or blue share.
The menu shown on the right will appear.
Use the "ENTER" button (8) or "MODE" (10)
to switch between the setting functions.
"EV" = brightness
"R" = red share
"G" = green share
"B" = blue share
Change the values with the " " button (7) or " " button (9).
• Press the "SCAN" button (4) to terminate setting mode. The display shows the preview with
the values just changed in the display.
42