Operating Elements; Important Notes - Reiner jetStamp 790 MP Kurzanleitung

jetStamp 790/790 MP
jetStamp 792/792 MP

Operating Elements

1
Trigger
2
Battery compartment
(back of the stamp)
3
Reset button (back of the stamp)
4
Charging station
5
Connection voltage supply
6
Green charging control light
7
Mini-USB socket
8
Locking tab
Display and button functions
The display is divided into the following three zones:
A
The number of the currently selected imprint (P : 01 ... P : 29)
Numberer repetition value (e.g R : 01/01)
B
Selected imprint
Top line: Pretext and number
Bottom line: Date and time
C
Display menu bar with menu items and commands
D
Four buttons
Each button is always assigned to the menu item or command
that is displayed above it in the display menu bar.
Menu access
Press [MODE] until [SETUP] appears in the display menu bar.
f
Press [SETUP].
f
"SETUP - MODULE SETTINGS" appears.
Press [CALL].
f
"SM - SETTINGS" appears.Important Notes

Important Notes

Before commissioning of the jetStamp 790/792, always read the operating instructions and in
particular the safety notes with care. This prevents mistakes in handling of the marking device
and connected safety risks to keep you safe and avoid damage to the device.
13
9
Ink cartridge handle
10
Locking rail
11
Keypad
12
Display
13
Cartridge
14
Nozzles
15
Small felt pad
16
Protective film for cartridge
17
Cartridge contacts