Description And Use; Handling And Storage; Safety - Vortice VORT JET-R Betriebsanleitung

ENGLISH

Description and use

VORT JET-R Type Radial fans are used in general ventilation projects and in smoke exhaust fan carpark ventilation. The
Axial fans may not be used in areas in which an explosion-capable atmosphere can be found. The motor is found combined
with the impeller in canals where the air circulation actualized and the air flowing is actualized by the way of impeller. The
fan cannot be installed outside without water precaution.
These devices have been designed for use in commercial and industrial environments.

Handling and storage

The fans are delivered on wooden pallets wrapped in plastic stretch. Transport the fan to the place of assembly in its original
packaging. During transport, connection cables, terminal box and wire connections mustn't be damaged. Load and unload
the fan carefully, in order to avoid possible damage. Use suitable lifting equipment. The fan should be stored in a safe, clean,
dry, vibration free, location. A regular monthly rapid spin of the impeller is recommended to prevent grease hardening and
possible brinelling of the bearings; the impeller should not be in the same angular position after rotation.
When dismantling the crate to gain access to the fan assembly care should be taken to avoid injury from sharp edges, nails,
staples, splinters, etc.

Safety

Warning:
this symbol indicates that care must
be taken to avoid injury to the user
• Follow the safety instructions to prevent any harm to the user.
• Do not use this appliance for purposes other than those described in this manual.
• Having removed the appliance from its packaging, make certain that it is intact and undamaged. If in doubt, consult a pro-
fessional or contact an authorized Vortice Service Centre.
• Do not leave packaging within reach of children or individuals with disabilities.
• Do not use this fan in explosive and corrosive environment.
• Store the appliance out of the reach of children and differently able persons after deciding to disconnect it from the power
supply and use it no more.
• Responsibility of the defects which can be occured as a result of unauthorized personnel intervention to fan or to be used
non-original spare parts belongs to the installer.
Caution:
this symbol indicates that care must
be taken to avoid damaging the appliance
• Do not make modifications of any kind to this appliance.
• The maintenance instructions must be followed to ensure the appliance does not suffer damage and/or excessive wear.
• The inside of the appliance must be cleaned only by a skilled professional.
• Inspect the appliance periodically for visible defects. If the appliance is defective in any way, do not use it; contact a Vortice
authorized Technical Support Centre without delay.
• If the appliance does not function correctly or develops a fault, contact a Vortice authorized Technical Support Centre
without delay. Ensure that only genuine original Vortice spares are used for any repairs.
• The electrical system to which the appliance is connected must comply with current regulations.
• Connect the appliance to the electrical power supply/socket only if the rated power of the supply is compatible with the
maximum rated power of the appliance. If not, contact a professional electrician without delay.
9