Cleaning - Silvercrest SKME 150 A1 Bedienungsanleitung

6. Cleaning

Clean the device prior to its first use!
DANGER! Risk of electric shock!
Pull the mains plug 4 out of the wall socket before
you clean the device.
The motor unit 5, the connector cable 4 and the mains plug
must not be immersed in water or other liquids.
DANGER! Risk of injury from cutting!
When cleaning the grinding space 2 ensure not to touch the
blade 3. It is very sharp.
WARNING! Risk of material damage!
Do not use any astringent or abrasive cleaning agents.
None of the parts may be cleaned in the dishwasher.
Grinding space
After each application, clean the grinding space 2 with a dry
cloth or a brush.
Wiping off
Wipe off the motor unit 5 with a slightly damp cloth. In case of
heavy soiling, put some detergent on the cloth. Then, remove any
detergent residues with a clean cloth. Prior to the next use, the
motor unit 5 must be completely dry.
Washing off
• The lid 1 can be washed by hand in warm water with deter-
gent.
• Afterwards, rinse the lid 1 with clean water.
• Dry the lid 1 carefully before putting it back on.
12
GB