Troubleshooting - Zipper Maschinen ZI-HS8PT Handbuch

ZI-HS8PT
SHARPENING WEDGE
This log splitter is equipped with reinforced
splitting wedge which blade is specially
treated, After long periods of operation, and
when required; sharpen the wedge using a
fine-toothed file removing any burrs or flat
spots on the edge.
9
TROUBlE SHOOTING
DISCONNECT
FROM THE POWER SOURCE PRIOR TO
ANY CHECKS, MAINTENANCE, UPKEEP
ETC...!
MOTOR DOES NOT START
Probable cause
No current in the socket:
Extension cord defect:
Incorrect connection line
3N~400V:
Switch or capacitator de-
fective:
LOG SPLITTER DOES NOT WORK - MOTOR RUNNING
Probable cause
Valve is not opened owing
to the connection parts
loosening.
Control levers or Connec-
tion parts bent
Lower hydraulic oil level
ABNORMAL VIBRATION NOICE
Probable cause
Lower hydraulic oil level:
INCORRECT MOTOR ROTATION DIRECTION
Probable cause
Incorrect connection:
THE LOG SPLITTER
Solution
Check mains fuse
Unplug, check, replace
5-line connection
1.5mm required
2
Have this checked by an
electrician.
Solution
Check and tighten the
parts.
Repair the bent parts
Check and refill hydraulic
oil
Solution
Check and refill hydraulic
oil
Solution
Change poles by switching
the pole switching device
in the plug with a screw
driver by 180°
Let polarity be reversed by
an electrician.
at
EN