Stadler Form Atlas Gebrauchsanweisung Seite 20

FIRST USE / OPERATION
Preparation:
When using your Atlas for the fi rst time, place it on a smooth, fl at and stable
surface. To stabilize it, you can fold out the 2 Feet (4) stalled under the Main
Base (3).
Select the suitable Plug (9) and (10), and install it by pushing back into the
slot with a "click" sound.
Fill a bottle with max 0.5 liter (22 oz) clean, fresh and cold water and fi x the
Bottle Adapter (5) onto the bottle completely till it stops. Do not use carbon-
ated water. To avoid scales, distilled water is recommended.
Operation:
1. Open the Mist Outlet (1), and make sure it is not facing directly or too
close to electrical sockets, walls and other objects.
2. Push the bottle, together with the Bottle Adapter (5) back onto the Main
base (3). Do not press the plastic bottle.
3. Plug in the Adapter into the Socket (7) and with the Plug (9) or (10) into
the main power supply.
4. Switch on the unit by turning the Main Switch (6) clockwise.
5. Mist output can be adjusted by turning the Main Switch (MAX is on the
very right end of the dial)
6. When there is not enough water in the unit, the unit will be switched off,
and bottle must be refi lled with fresh clear water.
Atlas (HAU-478) (98x108) - manual.indd 20 Atlas (HAU-478) (98x108) - manual.indd 20 26.10.2011 20:38:02 26.10.2011 20:38:02