Connections For Turnouts; Operating Turnouts - Märklin 72752 Bedienungsanleitung

6. Connections for Turnouts

Plug the 3-pin plug on the turnout mechanism (74792) into
the 3-pin socket on the backside of the control box.
The LED is activated on the buttons only when they are
connected with a turnout.
10

7. Operating Turnouts

Pressing on the button will set the turnout accordingly. If the
red LED comes on at the button,
on the control box, the turnout is set for "branch".
If the green LED comes on at the button on the control box,
the turnout is set for "straight".
If everything is working properly, the label included with the
72752
control box can be affi xed to the latter and can then
72752
72752