Functions And Programs - kroeplin B110 Bedienungsanleitung

Keys:
No. Key Functionen
10 MODE
11 SET
12 DATA
13 ON <0>

3. Functions and programs

Function
Basic functions
Switching on
Switching off
Switch
ABS REL
Example: at 10mm
Switch
REL ABS
Example: at 10mm
- Select measuring programs
- Zero setting adjustment (+)
- Adjustment of tolerance limits (+)
- Choose MM / INCH
- Choose scale interval
- Start SETUP – Menu
- Start OFFSET
- Start tolerance limit adjustment
- Start selection of the measuring unit
- Start selection of the scale interval
- Saving of the settings
- Data transfer
- Zero setting adjustment (-)
- Adjustment of tolerance limits (-)
- Key lock ON / OFF
- Switch on
- Switch off
- Changing between absolute measure-
ment and relative measurement
(0-Preset)
Basic
Remarks
-
-
-
-
-
-
Action Result
18
MIN / MAX / HOLD / TOL
Only in SETUP – Menu
(see detailed specification
"3. Functions and Programs")
(see detailed specification
"4. Handling of Functions and
Programs")
(see detailed specification
"4. Handling of Functions and
Programs")
(see detailed specification
"3. Functions and Programs")
Display only in REL
Remarks
The last mode will be shown
Note: The gauge switchs off auto-
matically if it is not used for longer
than 1 min.
Switch can be done in Mode MIN /
MAX / HOLD and TOL