Technical Data - Hilti BX 3-L Original Bedienungsanleitung

4

Technical data

4.1 Fastening tool
Weight in accordance with
EPTA procedure 01/2003
Nail length (collated nails)
Accessibility
Nail diameter
Magazine capacity
Compression stroke
Contact pressure
Application temperature (ambient temperature)
Recommended maximum fastening rate
Rated voltage
Maximum emitted transmission power
Frequency
4.2 Noise information and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions have been measured in accordance
with a standardized test and may be used to compare one power tool with another. They may be used
for a preliminary assessment of exposure. The data given represents the main applications of the power
tool. However, if the power tool is used for different applications, with different accessories or is poorly
maintained, the data may vary. This may significantly increase exposure over the total working period. An
accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This may significantly reduce exposure over the total
working period. Set out additional safety measures to protect the operator from the effects of noise and/or
vibration, such as: Maintaining the power tool and accessories, keeping the hands warm, reorganization of
work patterns.
Noise and vibration information
Typical A-weighted emission sound power level (when driving
nails) (L )
WA
Typical A-weighted emission sound pressure level (when driv-
ing nails) (L )
pA
Uncertainty for the given sound level (K)
Total uniaxial vibration values (in z-direction)
Vibration emission value (when driving nails) (a
Uncertainty (K)
4.3 Battery
Battery operating voltage
Ambient temperature
Storage temperature
22 English
Printed: 19.07.2018 | Doc-Nr: PUB / 5376263 / 000 / 01
BX 3
B 22/2.6 Li­Ion (02) 4.0 kg
B 22/3.0 Li­Ion (01) 4.1 kg
B 22/5.2 Li-Ion (01) 4.3 kg
14 mm ... 30 mm
52 mm
3 mm
30 nails
12 mm
50 N ... 70 N
−15 ℃ ... 50 ℃
650/h
21.6 V
−11.9 dBm
2,400 MHz ...
2,483.5 MHz
)
h
BX 3-L
4.0 kg
4.1 kg
4.3 kg
14 mm ... 36 mm
46 mm
2.75 mm ... 3.0 mm
30 nails
12 mm
50 N ... 70 N
−15 ℃ ... 50 ℃
650/h
21.6 V
−11.9 dBm
2,400 MHz ...
2,483.5 MHz
Concrete 101 dB
Steel 105 dB
Concrete 90 dB
Steel 94 dB
3 dB
Concrete 2.3 m/s²
Steel 2.2 m/s²
1.5 m/s²
21.6 V
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
2180111
*2180111*